Greg D
-
Posts
50 -
Joined
-
Last visited
Content Type
Profiles
Events
Forums
UPGRADE
Gallery
Blogs
Posts posted by Greg D
-
-
Yes, Left and Right for me. And just confirming my interest. Let me know where to from here!
-
-
-
On 14/04/2018 at 03:38, cweeden said:
Hi Greg,
Are you still planning to install a modified engine? Do you have any details you could share?
cheers
-Chris
Hi Chris
Yes, still intend to do the modifications. I managed to get another complete V8 engine which we have now stripped down. Its a part time project between myself and a friend (engine builder) and is fitting in around our day jobs over the course of this year. I have now got all the major parts I need for the rebuild (this took me 5 years to get the parts I wanted!) so we just need to get on with it now, but we are finding it challenging as things are pretty busy with work for both of us. The Link ECU install was the first step on the road to preparation for the modified engine. As far as the engine goes it will have forged coated pistons, billet rods (Saenz), Billet crank, Hybrid T-25 turbos using the internals from TB2804 turbos and water/methanol injection. Also using ARP head studs and bottom end kit.
Cheers
Greg
-
Hi Jason, I installed a Link ECU in my V8 last year. The Link model was the 'Thunder'. http://dealers.linkecu.com/G4PlusThunder
The reason for a Link was purely around a local experienced installer / tuner lived close to me. I am sure there are better brands out there this was just the way I went. It was a very straight forward installation, took about 10 hours to remove the old unit and install the Link. As Dan mentions the work is really in the mapping. We has a few niggles along the way but these were sorted out and the car performs really well and I am glad I went this way. The reason for the standalone install is to have tuning flexibility for when I install a modified engine next year, but that's another story....
If you decide to go the stand alone route and decide on a Link ECU PM me and I can forward on more details around who I used as I am sure he could talk to your local Link dealer and supply the maps he used for my car.
Off course the less complicated, practical and more cost effective option is the one Mike mentions above!
All the best with your decision making
Greg
- 2
-
Just ordered tanks for my V8 from Andy at Axminster, Based on his current work load he will start on them in May. As Ian says, excellent quality but not cheap. I am in New Zealand so shipping is expensive. A cheaper option would have been to have them fabricated locally but I don't intend to fit them until next year so nothing to give a fabricator as a sample.
-
Happy to have mine sent out last. Thanks for the great job you are doing getting this to come together Mark.
-
Hi All
I am happy to have mine sent out last as I have no great urgency to install this.
- 1
-
Hi guys
Paid on the 15th May. I sent a PM to Mark K the same day to confirm my payment. Sorry I should have confirmed on this thread.
- 1
-
Thanks for the updates Mark, getting closer!
-
Thanks Travis, didn't see the fine print! I had the Saturn's on when I ordered them back in 2013 so probably skipped over reading that. I'll call them and get the mod required.
-
Hi Guys
Wondering if someone can help with this one. I have purchased the PNM brake upgrade, I went for: 321mm 6 piston two piece front and the 321mm two piece 4 piston rear set up. I have OZ Nova wheels and my car is a 1999 V8 SE so am using the kit for the '1993 onwards Lotus (including V8)' option. The fronts fit with no problems at all. The rears are fitted but the wheel will not go fully on! they hit the caliper before go all the way on. There is no where near enough clearance. I'll call the guys at PNM on Monday but just wondering if anyone has fitted the rear kit with OZ Nova wheels? Can't see anything on the website that indicates they don't fit with these rims.
Cheers
Greg
-
Sounds great Mark. Do we have 5 confirmed now?
-
Thanks for your reply Jacques, I appreciate that low volume numbers would be expensive to produce. Will just have to hang in there a little longer to see if more people can get on board!
-
Hi Mark, What's the price for five with the five people we have interested? Still very interested and would like to get an order in but think we will be waiting forever to get to 10 people!
-
I am still very keen, keep me as in! Any further progress on this one? I am in New Zealand but sounds like Bibs has a sweet deal on shipping!
-
I'm keen Mark. Count me in. This looks really good!!!
Keep me updated.
-
SCCDA0827XHC15845
1999 V8SE in New Aluminium with black leather interior.
Onaero Beach
New Zealand.
-
Hi All
Looking for a complete V8 ECU and two turbo's for a 1999 V8. New or secondhand
Thanks
Greg
-
Hi All
I live in New Zealand and I have found a place to buy a new 6400 touch key, I do have one but would like two sets. I have a 1999 V8 SE. How do I get this programmed? the place I am getting it from can't help!
Thanks
-
Thanks Bibs
-
After a complete passenger side door mirror for a 1999 V8 SE, So will be Citroën CX style. Thanks
-
Hi All, Does anyone know where I can get a 10 tooth window lift motor? Passenger side one has died, probably can be fixed but would like to replace both of them if I can. Car is an 1988 carb turbo. I can find 8 tooth motors but 10 teeth seem to be non-existent!
-
Hi All,
I'm hoping to get a few items from the sale. I am based in New Zealand but my sister lives in London and can pick the parts up for me. I am having trouble finding the closest Lotus dealer to her Flat, or work, so I can get the parts sent there for pick up. Can anyone help me locate the nearest London dealer? She lives in Hugh Street, SW1V, Pimlico and works in Berkeley Street W1J 8HD.
Thanks
Greg
Fire Supression Systems
in Engine/Ancilliaries
Posted
Hi Mike
I have had a Lifeline Zero 360 2.25kg Stored Pressure System fitted to my car (1999 V8 SE).
Zero 360 Novec 1230 Fire Suppression Systems (lifeline-fire.co.uk)
Cheers
Greg