Seat Removal

[MattyB]

I'm looking to remove the passenger seat, as the side bolster has very slightly started to peel away from the base. It's nothing major, but I want to get it sorted before it gets worse, it spoils what is otherwise a perfect interior.

I can't find any guides about removing the seats (mine also has heated elements). Other than being careful to disconnect that first, is there anything else to be aware of? I'm hoping that, due to the lack of info, it's fairly straight forward?

[Bruss]

Straightforward. 4 bolts.

when you lift the seat you will see the heated seat and the seatbelt warning light connectors. Just unplug them, remember which goes back where. Put the seat bolts back in the sliding nuts to stop them dissapearing.

DO NOT turn the ignition on until the seat is reconnected to the seatbelt warning light. It is said that the warning light will need a dealer reset if you turn the ignition on with the connector unplugged.

I haven't tested this though. 😁

[MattyB]

Awesome. I assume there's nothing funky going on and I can reconnect the seatbelt warning light without the seat in place?