does anyone have a picture of a 1979 esprit s2 pedal box?

[vintaylor]

Hi guys, took my pedal box apart to treat it and respray, does anyone have a picture of one put back together? Would be good to have a picture

to make sure im doing it right

Cheers Vin

[Matt-watts]

Hi

The best i could find on my pc, hope they help

Best Wishes

Matt

[vintaylor]

Cheers Matt, its a big help!

Vin

Edited June 28, 2010 by GKP
No need to quote all of those photos.

[Advantage]

Full Forum Members have access to the downloadable Parts Manuals where it's possible to find such gems as this:

[Nelly]

Hi Vin,

GKP is right. The access to the parts manuals has been really useful to me, and you get them just by joining the forum.

Also if you can pick up a workshop manual. I got one for £26 on ebay and its going to be a massive help with putting my car back together, along with any other future problems.

I know money is tight when doing a project but joining the forum is £20 well spent!

(Do I get any commision guys?!)

[Freemason]

How do the accelerator pedal parts of the pedal box come apart? I've punched out the pin but nothing else will budge. Do I need to get someone to press it out?

 

 

 

 

 

 

 

 

 

[Freemason]

 

So my plater lost some parts - like I didn't have enough crap to worry about with this car - so am chasing up a few bits and pieces.

On the pedal box, does anyone know what spec the two bolts/nuts on top are? The ones floating in the foreground on the right that have no number (real helpful). Don't suppose anyone has their pedal box lying around easily accessible? 

 

 

 

[Lou R]

Hi Antonio,

 

The 2 bolts you identified as floating are both M8 x 1.25 x 30 mm.  Sorry, but I don't understand your reference to the "bolts/nuts on top".  If you can further clarify I can help out as my pedal box is already restored and off my car awaiting its time to go back in.

 

Lou R

[Freemason]

Thanks for that! I am also after the specs of the four bolts that hold the pedal box through the body to the threads in the chassis if you have them?

[Lou R]

Antonio,

The studs should be welded to the pedal box and are fitted with M8 x 1.25 Nylocs (don't forget the spacers and washers).

Lou R

[Freemason]

Hi Louis,

I don't mean the studs that are welded on and go the brake booster through the front boot, I mean the bolts that face down and fix the pedal box to the captive nuts/threads on the chassis.

Four bolts in total, you can see two of the holes either side of the box in the second pic I provided. In the diagram the holes are obscured, only one is barely visible in the direction of where the number 8 is pointing.

 

[Lou R]

Hi Antonio,

Sorry !  the 4 bolts that secure the pedal box to the chassis (through the body) are all M8 x 1.25 x 20 mm (each with a washer and lock washer).  Good luck getting that one hard one back in - I recall it was a major pain to get at it.

Lou R

[giorgio67]