the up standing lights after a one hour....

[Tocus]

hi,

everybody knows it that the lamps stand up at a eclat or a elite s1 type..

but i wanne know what i must get to fix it,

because my eclat the lights are always down butt the elite they stand always up..

and i want the elite lamps also down i know of course that the work with facuum at the s1

butt is the rubber hose leaking? or whats is the problem so i can fix it..

thanks already

[andydclements]

It could be almost any part of the vacuum system, pipe, jints, non-return (aka one-way) valves, actuation pod etc.

You could start by seeing if the actuation pods leak themselves using a vacuum pump and some good pipe, to see if the pressure differential disappears after a short while. If they're OK then you simply ( that's the same use of simply as in the words of Haynes manuals) have to work your way through the system until you find the next bit that leaks, replace it and move on.