Getting the horn

[Rick Edwards]

I have a somewhat intermitant horn!

I know the actual horn works as when the alarm is triggered it is fine, so I assume the button on the wheel is in need of some contact cleaner or something. Question is...how easy is it to remove the wheel centre and find the offending bits to clean up. I have the MOT looming at the end of the month and I think its the only thing that may let it down.

[mr.oogieboogie]

did this on mine a couple of years back, pretty easy, i i remember i added a washer to get a good contact. if its the hoirns themseves (as they fill with water) and you replace them you can turn them so the water will run out as it sits and rots them

[Rick Edwards]

Thanks for that. I am pretty confient that its just the contacts. Is it just a case of pulling off the lotus logo bit of the wheel and finding the offending bits?

[mr.oogieboogie]

Pretty much

[Rick Edwards]

Blimey. I wish all problems were this easy to solve. The hardest part was getting the soft boss thing back on. At least it's all horny again! Hopefully that will get through the mot now

[mr.oogieboogie]

coo,l glad you fixed it