Unable to break loss the allen bolts that hold the half shafts to the brake disks. First want to make sure counter clock wise is currect direction to remove the bolts/? (righty tighy - lefty lossey)

Should I use an air impack driver?

First want to make sure counter clock wise is currect direction to remove the bolts/? (righty tighy - lefty lossey)

Should I use an air impack driver?

Correct & by all means :-)

Thanks for the direction, I'll move forward with the iar impack driver.

Air impact drivers might be difficult to get access with. I've always found that using a 3/8" drive allen key socket and a socket bar will undo them. I have resorted to jacking the car up on the end of the bar before now....you have to be certain that the key is well into the socket headed screw and doesn't cam out, but that way will provide more than enough torque to break loose the fasteners; and it's rather more controlled than an air impact tool.....

The air impact tool worked perfectly. Thanks for the input. Now just remove the A/C pump, water lines and motor mounts.

I will start lifting the motor on saturday.

The air impact tool worked perfectly. Thanks for the input. 

also buy new bolts I have just had issues with some snapping its not worth the risk re-using old bolts

Well finally got it out. A lot more work than I imagined.