Help, my Exige roof seal has dropped off!

[jackettc]

Hi All,

 

I lifted the hard top off my Exige V6, and the fat roof seal on the back dropped off!

 

I have no idea which way round it goes back on, and I have a track day tomorrow.

 

Can anyone help please, as I've searched the internet for pictures, etc.

 

Pictures are below (Sorry about the legs

 

http://1drv.ms/1MOa0Tw

[Arun_D]

Item 28 in this diagram? Think you can just about make out the orientation.

 

https://www.deroure.com/diagrams.asp?TBL=6201&MAK=1&MDL=40&SMA=0&SMO=0&ST=&SC=0

 

TBH, I'm sure a helpful soul with a hardtop lying around will be able to be of more use than my attempt.

Edited June 18, 2015 by Arun_D

[ArthouseCompany]

Think this should help you, pic from my V6 Hardtop. Looks like you only need a new sticky tape.

Edited June 18, 2015 by Blue1000

[jackettc]

Thanks so much for the replies, easy when you know how.

From the pictures I worked out you can just push it in from below when the roof is on!

Cheers

Chris.J

[ChrisBuer]

Ah. Mine dropped off the other day and has been sitting I my garage since as I didn't know how it went back on. I was going to ask B&C to look at it when it goes in for its service but having read this I might give it a go myself.

[redspeed]

I thinks it's a case of TADTS with this seal.

Went to put my hardtop back on yesterday and it had done its best to separate from the hardtop; hanging on by a thread, but just enough to give a clue as to its orientation