Anti-roll bar

[Cushing]

Hi all, the Esprit is going in for Geometry check tomorrow so just been underneath checking, looking at the ends of the anti-roll bar and looks a bit strange when the cars on the ground. Is it possible to install up-side-down ?

 

Steve  

[andydclements]

Yes, when the car is at normal height the bits you have in the picture should be approximately horizontal. From memory, that means the bit secured to the frame is higher than those, if inverted the bits you have in the pic would point down toward the floor.

[Cushing]

Yep, that was a bit embarrassing, got the guy to switch it around before Geo check, that sorted the ride height problem at the front !!!! now sits nicely ,  thanks for that, Also found out I've got too much caster, 2°25', ordered shim washers from SJS.