Alarma Cobra 6422 V8-GT

[Xsesiv]

Hello,

I have some problems with my Alarm and I don't know how to solve it, If someone help me I appreciate a lot!!

The car runs well, Ignition ON, push the button to desactive the immobilization and start engine run well but when I stop the engine and wanna close the doors with the button key after about 30-40 seconds the alarm goes ON without any know reason. But If I do the same procedure, except closing the doors with key button, I close the doors each one with the key only the alarm run well, any ideas? thanks

Greetings,

[redshift]

With the ignition off the immobiliser will automatically activate after 20 to 30 Seconds. If you then press the key fob is changes to the next state which is fully alarmed. Think thats right can't check as the car is in the UK with Esprit Engineering.

[Xsesiv]

4 minutes ago, redshift said:

With the ignition off the immobiliser will automatically activate after 20 to 30 Seconds. If you then press the key fob is changes to the next state which is fully alarmed. Think thats right can't check as the car is in the UK with Esprit Engineering.

Thanks,

I dont understand well with my poor english, You tell me that with ignition off, waiting 20-30 seconds and after press the key fob button the alarm is fully armed? ok I did and after another 30-40 seconds alarms trigger. but without pressing the key fob button only closing the doors with normal key the alarm seems well. 

Really sorry for my english.

[redshift]

Not quite;
20 -30 secs after switch off the immobiliser activates (no key fob action required) press the fob now and the full alarm is activated.
If the alarm is sounding 30 -40 seconds later something must be triggering it -maybe the microwave intrusion detector. Mine sometime triggers by people walking close to the car.

[Xsesiv]

20 minutes ago, redshift said:

Not quite;
20 -30 secs after switch off the immobiliser activates (no key fob action required) press the fob now and the full alarm is activated.
If the alarm is sounding 30 -40 seconds later something must be triggering it -maybe the microwave intrusion detector. Mine sometime triggers by people walking close to the car.

Thanks I will try it,

If my microwave intrusion was the fault, is possible to unplug the wire and alarm run as normal mode? 

[redshift]

YOU can disable the microwave unit from the Key Fob but I don't remember how. It will be in the owners handbook.

[Xsesiv]

11 hours ago, redshift said:

YOU can disable the microwave unit from the Key Fob but I don't remember how. It will be in the owners handbook.

Hi, 

yes the fault is microwave sensor, I disable it and works fine.

thanks a lot redshift!!!