Mark430

Need to replace my rear tyres on my 430 Cup. Lotus fit and recommend Michelin Pilot Sport 285/30 R18 - 97Y but Michelin have no production planned and I can't source any new tyres anywhere!! Anyone else having the same problem? Can anyone suggest an alternative? There are 93Y's available but these of course are not the correct load rating. HELP!!!!

Hi Dave Sorted 😄 It was simply that I had not started a new configuration. After updating Race Studio I just accepted the config I already had. Not sure if I missed something in the original firmware update instructions or it was not implicit. Really appreciate the help. Hope you are all well and safe. Cheers Mark

Hi Dave Thanks will give it another go. Question - where in the software (I assume you mean Race Studio) can you chose the model year?

Hi Dave Aim software version is V3.31.05 (64B) Firmware is 02.32.59 Cruise control Icon is shown You can see from the image above the shift light setup I'm trying to transmit.

Thanks Dave. Jack as you can see from the image and confirmed by Dave - not available. Dave - any thoughts on my shift light transmit issue! Would driving the car and learning the gears make any difference? Thanks

Will do Jack. Will take them tomorrow morning UK time and post.

Update to my issue - no change. Checked the firmware update, dash shows the correct version. As does Race Studio I cannot select any other model year on the dash 2011-2020 is the only one available. I've checked this with great care and none of the buttons, Prev or Next do anything in this screen. Select chooses the Model displayed and reboots the dash. I've done this 4 times in total now. I still can not transmit a shift light update. Updating the splash screen works no problem, but this of course is not model dependent. The issue is not a big deal, as I just wanted to tweak my shift light setup to better suit track use. As I (we) are unlikely to be doing any track days anytime soon I guess they may well be another firmware update by then! Only thing is I have not driven the car since the update and re-learnt the gears. I don't see how this would make a difference but you never know!! Anyone else had the same issue or can test?

Hey Arun Same experience, had to change kph back to mph. Not road tested and unlikely to until lock-down is over! Relearning gears no big deal and understandable after an update. As mentioned yesterday firmware update all seemed to work fine and reports correctly on dash and Race Studio. Haven't had a chance to test again today to resolve updating shift lights, will do tomorrow and report back. Arun did you try to update (transmit) anything after updating? Be interesting if yours works okay or if you had/have the same problem as I have. As Arun says tanks for all the work Dave. Cheers Mark

Hi Dave Thanks. I have reset the dash to the correct model year via the dash menu twice , when saved the dash reboots. I assume this is what you mean by 'resetting the dash? Only model year 2011-2020 was listed. I'll have another look tomorrow to make sure I haven't missed anything and let you know. Cheers Mark

Installed the latest version of Race Studio and updated the firmware. All worked fine and pleased with the various tweaks for my Exige 430 MY2018. Found an issue when I came to update the shift lights. I made sure the correct model year was saved on the MX2E (only option was 2011 to 2020). Updated the shift lights in Race Studio but when I transmitted the update I received the following error message (also see image); Transmitting configuration to device has generated errors. Device now runs with: Model Year 2011-2020 To transmit this configuration, first set into device: Model Year 2011-2020 I'm thinking this is a bug, no big deal I'm sure it will get sorted or have I missed something?

I'm on my second unit brought direct from AIM in the UK. First one had an issue with the graphics, the second one has a problem with the clock and date not saving after setting and rebooting on starting the car. AIM will be replacing when the next batch is available, which I've been told will be first couple of weeks in February. I do not know what the bug is. AIM have been very helpful.

Two more examples. Yes I know its not the right image of the Exige 430 Cup but its the nearest I could find to my car that I could use that looked good.

Hi Nano Anything is possible! When I have time I'll have a play in Photoshop. If anyone has a high resolution image of the 430 Cup logo please let me know or point me to the location.

Here are my versions!

Did you used RaceStudio3 with the unit connected via WiFi to do this?