Steffen
-
Posts
50 -
Joined
-
Last visited
Content Type
Profiles
Events
Forums
UPGRADE
Gallery
Blogs
Posts posted by Steffen
-
-
Hi.
Does anyone have Freescan v.2.1.0? Or know whare to find it?
The link on this site: http://users.ox.ac.uk/~ohare/freescan.htm does not work anymore.
The link on LEW is old (2.0.7)
Thank You
-
Thanks for replying
Shouldnt i get any trouple codes then?
I dont get any
-
Hello.
My Air condition is not working.
I got no action when i turn it on.
The AC clutch is working when i hotwire it.
The relay is working.
The ac switch inside the car is working. (tested with a meter)
The lamps on freescan AC Demand and AC Clutch dont light. And no trouble codes.
So i think the problem is before the ECU.
Any ideas?
-
My valve tappets are in good condition.
Sorry to hear John.
Nr 2 was broken on my car.
My fuel pressure regulator was not working.
-
Thanks for info.
Lets hope i have been lucky with the turbo and the cat.
I have ordered parts today from JAE.
The service is exelent there. I recommend it.
Good points Roger. Thanks
-
-
-
-
Hi.
I made the decision to take out the whole engine.
I want to take a overhauling on the engine so im sure everything is working perfect.
Thanks for the help guys.
I will inform you with updates on my rebuild.
Wish me luck
-
Thanks again!
I will try compress air to the cylinder to where the problem is.
The test with the oil is also easy to do.
I can't decide if to take out the engine or just the head.
I dont have a workshop. Only my garage.
I need to buy a hoist if im going to take it out.
How much time do i save? I guess the timing is hard without taking out the engine.
Anyone know a guide to take of the head?
I guess i get a problem with the exhaust manifold.
-
Thanks for the help guys!
I just checked the clearence on the followers.
The exhaust valve followers are all 0.30 mm
The intake valve followers was 0.15 mm. (some was actually 0.10mm, but it was not special on the nr 2 cylinder)
I did not see any typical errors. Should I remove the oil to see better? I only see the upper half of the follower.
Doesn't look like anything is wrong here.
Maby a piece of the valve is broken off?
I used a camera and didn't see any damage on the piston.
I was not able to see the valves with the camera.
-
Thanks for the reply
To be honest im not sure.
I have a mechanic friend that looked at it.
He sayd it sounds like a exhaust valve that is not working.
I have tested the ignition and fuel. Both are working.
How can I test if the cylinder rings are working?
I dont have fuel in the oil and the exhaust is good (no smoke)
Is there a guide somewhere to remove the head without taking out the engine?
It looks really hard. Should i lift the engine a bit?
-
Thanks for reply.
Looks like the valve in not closing.
What can the reason be?
Is it garanteed that the valve is proken? or is it other posibillities?
Is it possible to take out the engine head without taking out the engine?
-
Status report
Injectors are ok.
Sparkplugs and coils are ok.
Compression in cylinder 2 are 3bar and the rest is 8.
The hose on the fuel regulator was not connected.
Does it get to much or to less fuel without the fuel regulator working?
The sparkplug on cylinder 2 was really messy so i think maby a valve is not closing properly,
becouse of too much fuel from a non working fuel regulator?
Is that possible?
-
I have 3bar in nr 2 and 8bar in rest of the cylinders
-
I have lost compression on cylinder 2
Looks like i have some water in the oil,
so maby its the head gasket?
What is a typical problem on the esprit when you loose compression?
-
Today i got some problems with my S4s.
I was entering the highway and i had almost 100% throttle in 3nd gear.
At around 4-5000 rpm i suddenly lost power. No high noice or anything.
The oil temp was at 70c and the water was 80c. Oil pressure at 5.
Now it runs on 3 cylinders. I have spark on all plugs.
I dont have smoke from the exhaust.
I have connected freescan and i dont get any errors.
I have a feeling that maby the injector is broken?
What do you guys think?.
Any sugestions?
I go and take a compression test tomorrow.
Hope its not serious
-
Put me on the list
-
Hello.
I want to buy a Raid airbag steering wheel.
I also need the adapter.
I have a 95 mod esprit
Thank you
-
Thank you.
I will call JAE and buy the studs and lock nuts.
Maby i should change the gasket at the same time?
-
Thanks alot.
I have seen photos of your engine rebuild.
Looks really nice
-
Hello.
2 bolts on my exhaust manifold is missing.
The ones on the bottom on the turbo side.
Where can i get them? Is it just regular bolts?
Do i need to change the gasket?
-
Thank you
Now im happy that i dont need to do the job all over again
-
Hello;)
I changed coolent yesterday.
The problem is that i used Anti-freeze SF.
I fully drained the car before i filled it up with new coolent.
This coolent is pink.
Hope this is not a big deal :s
Anyone know the difference between these?
Freescan v.2.1.0 download
in ECU/Freescan/Espritmon
Posted
Thank you Bibs