LCD clock removal

[910Esprit]

Hi

Need to remove my LED clock as the adjustment button had been pressed too far in.

A bit of gentle levering had no apparent effect, so whats the process?

(start with engine removal.........?)

cheers Steve

[Spumkosteve]

You have to take the header rail off. Mine has two scews near the clock and two at the ends hidden behind the side rails. These come off if you prise off the rubber door seal at the top and undo the two screws visible from the outside but normally hidden under the seal. The clock is held on by two nylocks from memory and there's an electrical connector to undo.

[andydclements]

I assume it's in the roof trim.

Remove the 2 screws holding the mirror, screws along the front of the trim near the screen, remove the side roof trims by removing the screws in the door opening. I you have a sunroof, remove the rubber strip and any clips securing the foam backed cloth.

Think that's it.

Then simply remove the whole trim panel, the clock is secured to it by 2 bolts.

Andy