upgraded s4s clutch kit

[Tony94S4]

I rebuilded my s4s clutch and pressure plate,

the clamping load on the used s4s was around 790kg

and one of the side torque straps set had a litle bend on

the upgraded clamping force came out to 1312kg will c how long it will hold 400+whp,

the thrust bearings will work hard with that pressure

and the torque straps were replaced with better and thicker material

hope that should take care off hard, high rpm heal and toe down shifting and on off throtle

I relined two clutches I had in us for $120usd both

and did the pressure plate in australia for $120ausd

now if I can just put it togeather in the next few weeks and c how it holds