esprit s2 wipers

[auto]

Hi, I need some help trying to put my wipers back in my esprit I bought the esprit as a unfinished project so not sure how it all goes back together! I have placed the motor where I think it should go found the holes on the wheel arch, have I got the motor the right way round? please see my photo, my second question is how the wiper arm goes together I cant work it out, looks like mine has had some mods / fixes, welds / new bolt, maybe someone would post me a photo of how it should go back together?

 

 

 

 

[Paul Coleman]

Check the picture at the bottom of this thread... http://www.thelotusforums.com/forums/topic/59486-can-anyone-help-me-figure-out-the-following-s2-bits/

[peteyg]

Hi James,

 

Hope this helps.

 

 

Pete

[vintaylor]

Hi Pete,

Is there only 1 plastic/rubber bush used on the wiper?

[auto]

thanks a lot that's a big help.

[peteyg]

^{Hi Vin,}

 

^{One on the outside to stop leaks and one on the inside around the shaft of the gearbow to act as a spacer. Mine was missing the inside one for ages which meant the wiper was rubbing on the bonnet.}

 

^Pete

Edited September 23, 2013 by peteyg

[vintaylor]

Hi Pete,

 

Are you referring to these 2 bushes?  
 

The larger on is plastic and the smaller one is rubber:

 

 

[peteyg]

They look familiar.

[vintaylor]

Thanks Pete

 

Do you know the order of how they should be attached?

[peteyg]

HI Vin,

 

The big one butts up against the underside of the sill, so last thing you put on the gearbox before the shaft poke through into the light and the small one is the first to go onto the shaft on the outside.

 

Pete

[vintaylor]

Cheers Pete,

 

I'll probably be in touch in a year again when I come to fit it lol