Espritmon ABS Help Needed

[DaveS4s]

My problem is the Yellow ABS light is on, I ran Espritmon and it showed Red dots in the boxes Hold and Release for the Left Front, also Red dots at items #4 enable relay, #10 left front hold, and #13 left release.  What dose this mean?? is this a stuck relay? if so where is it located? how can I fix this?? Any HELP will be Appreciated. Thanks DaveS4s

[sailorbob]

The number next to the red dot indicates the error code the ABS ecu is reporting. See Service Notes Section JF25 for more details on the specific errors. It looks like your left front solenoid, or its wiring, is giving rise to the problem.

[DaveS4s]

Problem solved for now, what I did was to pull all the ABS fuses to check and clean the contacts, did the same for the relays. I disconnected the plug at the left front solenoid and checked that I had voltage. Next with the key in the off position I put moderate pressure on the brake pedal and turned the key to the RUN position, did this three times and the ABS light went out. Rechecked with Espritmon and NO faults showing. Oh Happy Day