S1 / S2 Silencer Internals

[GavinT]

Wondering if anyone has a picture of the internals of an S1 S2 silencer. I would like to make a more free flowing silencer. Buying one from the UK is expensive, so I was thinking I would cut the original one open, gut it and straight pipe it from inlet to outlet then close it up, thus keeping the original look. As I have a federal spec silencer I'm sure it's more restrictive than UK/ROW. Cheers.

[ramjet]

If you are going to gut it Gavin, just cut it open along the seam and go from there? Unless you need to know to cut it open?

[s1guy]

i replaced mine with a magnaflow,,ordered it the same size as the original so it fit perfect,,and sounds really nice,,,and its pretty much straight thru,,no restrictions,,

Edited March 4, 2013 by s1guy

[b69lotus]

I was looking at replacing mine with a Magnaflow as well. Which one did you use Ken? I was going to try the 7" single in/dual out.

What did you use for tips?

[GavinT]

Hi guys...thanks for the replies.

 

Jim, were you looking at Part# 13761?

 

Ken, also interested to learn what you went with.

[b69lotus]

Gavin

 

I was looking at Part #12761. I thought is was closer to the original spec muffler.

[s1guy]

sorry for the late reply,,my magnaflow is single in single out,,had a muffler shop make me a tailpipe ,my tailpipe goes to twin tips,,makes it nice because you can slide the tailpipe in,out and twist it  to get it to line up perfect in the valance,,my valence is currently off,so when i get home tday i,ll take a pic and get the part number,,,

Edited March 9, 2013 by s1guy

[s1guy]

heres 2 pics,,,my magnaflow is 6in round,,18 in long,,,hope this helps,,,bolted right up fr me,,but magna flow sells this muffler in a lot of sizes,,,it sounds really good,,,trying to upload pics,,,no dice,,,arrrghhh,,

[s1guy]

 still having probs uploading pics                                                                                                          

Edited March 10, 2013 by s1guy

[GavinT]

Thanks Ken, think I'll do something very similar. Do you remember the muffler part#? Or if you can give me the dimensions I can look it up.

[s1guy]

pretty sure mine is 6in diameter,18 in long,,,i just measured my old muffler and ordered the same size,,bolted right up,,cant remember the part num,replaced it a couple years ago,