Crank case, ooops!

[tirpsesutol]

During a rethreading of the flywheel sensor  bolt thread I accidently dropped the 10 mm bolt and washer in the opening. It sounds like it hit bottom but even with a scope I cant find the culprit! Is there enough distance between the flywheel and bottom of the casing for that bolt to clear?

[Vulcan Grey]

yes, but a magnet will help

[tirpsesutol]

^{Thanks Travis. I removed the boot floor to get better access and noticed one of my charcoal canister pipes were broken off.  Silver lining I dropped that bolt or I would have never known. I have a magnet but have to get a view of the bolt or Ill try just moving it around until it finds it. lol Good to know there is clearance in case it has found a new home.}