Just a quickie/S4 driveshaft roll pins.

[espritmania]

Hi,about to put the roll pins in the drive shafts.Are they fitted individually or do you tap them in complete.Cheers. 

[cjtpb13]

I installed individually. Remember to have the split in the pin 180* from one another and a dab of silicone at each end

[Vulcan Grey]

Make sure the axles are aligned, they don't work if 180deg from the original orientation.

Tap the larger pin in a bit with the slit perpendicular to the axis of the shaft, then tap the smaller pin in with the slit 180 deg from the slit of the larger pin. Then tap them home.

[espritmania]

Thanks.

[Techspy]

Anyone know what sizes they are? Is this something I can get at the parts store or are they specialized?

 

Thanks

[Vulcan Grey]

Metric, tough top get locally... can't remember the sizes