Gearbox mounts,which way up also cross refrence clutch slave For S4

[espritmania]

Hi, just put the engine back in and about to fit the new rubber gear box mount .I am not sure which way they go,can somebody please let me know or can you post a picture,thanks.

I have just purchased a clutch slave repair kit,on inspection the slave is knackered,can I  get one from my local factors??

[sailorbob]

The plate mounts lowermost with the bulk of the rubber facing upwards.

[espritmania]

Thanks

[sailorbob]

Here's a photo from the forum showing the correct orientation http://g37.picoodle.com/ltd/img37/5/1/30/sekinger/f_grq4_057_u6qlh.jpg

Edited October 12, 2013 by sailorbob

[espritmania]

Thanks,sorted,fitted.Just need to know what car the clutch slave comes from??

[sailorbob]

See this thread for the slave cylinder http://www.thelotusforums.com/forums/topic/57505-clutch-slave-cylinder-97-gt3/

[dodge1979]

I would use a repair kit on the slave cylinder..or indeed any cylinders unless they are new and just have been sitting around for years. Reason being is that even with new seals it can still leak because the bore will be worn. Its false economy..it might work for a while but if your doing the job do it once and fit a new unit..

[espritmania]

Bought a landrover one on ebay £6.99.I had to macnine the fixing nut.Perfect.