BC Forged RS31

[Kristof Thys]

 

 

 

 

 

Found these pictures on internet.  They are the BC Forged RS31 wheels.  They are made to order... (dimensions, PCD, colour, finish)

 

So me off to my Wheel&Tyre-shop friend.

 

Exact same specs as OEM:

 

front: 7.5x17 ET 26.3 - 5x110 - 65mm spigot + Pirelli P-Zero Corsa 205-45-17 88Y

rear: 9.5x18 ET 35 - 5x114.3 - 65mm spigot + Pirelli P-Zero Corsa 265-35-18 97Y

 

All in: 4140€ vat in (21%).  Comes with all TüV paperwork as well.  Price without the tyres: 3220€ vat in.

 

No idea on weight but for sure (a lot) less than OEM.

 

 

As these wheels are made to order, I might go a little lower on the offset at the rear, but not as aggressive as on the above pics.  10" wide rim is also a possibility.

 

It was OK for him that I posted this on here (Bibs or Jonny, I hope this is ok? If not, please delete) so if anybody should require more information or is interested: info@crauwelsbanden.be  -   www.crauwelsbanden.be

 

 

Edited March 10, 2015 by Milton1

[AndyFoggy]

Fantastic Wheels, I'm interested!

Edited March 10, 2015 by AndyFoggy

[dixie v6]

I prefer these wheels,but in black:

 

 

 

 

http://bcforgedwheelsusa.com/RZ-053_Wheels_Detail.php

Edited March 11, 2015 by dixie v6

[AndyFoggy]

Also the beautiful graphics . There are pictures of the back ?

[dixie v6]

Here are the mat black ones:

 

[AndyFoggy]

Dixie V6

You can install this wheel on Exige V6?

[Kristof Thys]

Dixie V6

You can install this wheel on Exige V6?

Maybe dixie is at work

[diego]

Here are the mat black ones:

 

 

 

they look awesome !!!!!

[dixie v6]

Maybe dixie is at work

Yes you can, same system as with the RS31,base rim exists in 17, 18 and 19" with increments of .5 in width.

Got the weight of the RS31 just now: front 6.94 kgs, rear 8.92 kgs for 9.5" wide and 9.02 kgs for 10" wide.

Dixie was not working but driving around for fun with his Exige  and Milton just said it all,yes they will fit......

[Kristof Thys]

Dixie was not working but driving around for fun with his Exige  and Milton just said it all,yes they will fit......

 

[AndyFoggy]

If we make a buying group , we they discount?

[Kristof Thys]

If we make a buying group , we they discount?

 

Andy, my friend quoted me (and Dixie, who is also a mutual friend) for the wheels; as always if the numbers go up the margins will go down.  I see you are from Italy, so maybe there is a BC Forged dealer as well?  If so, maybe you could get a quote from them as well to establish the base line.

 

For me, they guy being my friend, I will always get my wheels from him; and ultimately he gives me a very good price (which is relative as I've never even checked with other wheel & tyre shops).  I hope I'm making sense here.

[AndyFoggy]

Kristof, I don't know if in Italy there is an official dealer. I know that in Suisse there are some dealers. I can try to contact the dealers in Suisse for a quote. If the quote will be expensive respect the price in Belgium, for me will be simple to choice the opportunity to buy the wheels in Belgium. Am I right?

[Freejack]

Has someone installed 10 inch on the rear ??

 

I am wondering if this might fit without any troubles.

Edited March 12, 2015 by Freejack

[dixie v6]

Has someone installed 10 inch on the rear ??

 

I am wondering if this might fit without any troubles.

Komotec sels 8" wheels for the front and 10" wheels for the rear so it shouldn't be a problem....

[Simon Frood]

Really like the Matt black, would suit the exige nicely