Door glass trim seal

[fflyingdog]

Well after 2 years of having drivers side window seal I decided to remove old one as it was ripped and had turned in and twisted itself, what an absolutely hilarious job that was ,silicone grease is your friend as is a pair of needle nose .I pulled old seal out ,removed door card and associated plastic covers  on inner door skin, loosened the window frame, pushed new seal down the runners with the help of silicone grease, now have a nice free running quiet cabin....bliss.

 

   Nick s4s

[Chillidoggy]

Shame you didn't video it so I can see how it's done!

[OwenGT3]

I took photos when I did mine.

 

https://www.flickr.com/photos/owengt3/sets/72157625966580386/

[fflyingdog]

I didn't go as deep as you did Owen,just loosened nuts on runners, pulled runners away,and with some MS4 silicone grease 'fed' the seal down  the glass runners ,bit of a pain but not too harder job,as with most jobs the thought of doing it was worse than the actual job itself.Made such a difference to the cabin noise at speed.