Diffuser brackets

[Miguel]

Hi people,

just wanting to gauge interest - I currently make and sell replacement mudguard brackets for the Evora. Recently I was sent a very rusty rear diffuser bracket from an exige (see pic) and I'm working on a marine grade stainless steel version which should last the lifetime of the car. We're folding up a prototype today -i'll post a pic later.

Part number is B122B0133F/B122B0132F -think these fit the Elise and Exige series 2 (perhaps someone could confirm?)

[S2111S]

Not the Elise, just the S2 Exige.

 

[Miguel]

Perhaps the DeRoure site is wrong then, if so, that means this may not be worth pursuing.

[S2111S]

Apologies Miguel, added to the Elise on 2005 manufactured cars onwards.

The brackets for the driving lights in the front grill might be another good option for stainless.

 

[Miguel]

Thanks for confirming Simon. Always happy to look at other parts -hard bit is getting my hands on them though.

[Miguel]

First run of diffuser brackets has been a success. Picture shows the new bracket made from 316grade stainless steel (Marine grade), versus the OEM mild steel version. Rust will no longer be an issue and they're also lighter!

[Degs]

Hi 

Are you still making these ? If so -how much ? I could do with a pair.

Thanks

Derek

[machine7]

I have missed this topic, but could do with a pair, and quite probably 2 pairs.

[Miguel]

Hi all, I’m making a small batch so it’s cost effective, will help if people can put the word about a bit so I can sell them. 

[C8RKH]

@Miguel great work - I'd put a set of your mudguard brackets on my old Evora, and will be getting a pair soon for my newer Evora the 410Sport - they factory ones are only going to rust so I might as well replace them before the the  bolts seize in them etc...

Keep up the good work and might be worth advertising in the classifieds too for these new brackets.

[Leghorn]

Hi @Miguel

these look great and just what I’m after. Do you still do these? Would like to buy a pair. 
thanks. 

[Vrin]

Hi @Miguel

 

Any chance you're still making/selling these? If so, I'd like to buy a pair.

[Miguel]

Hi Guys, unfortunately there was never really any interest generated on this. I think i only made about two pairs as samples. I still have the drawings to fabricate some but the cost and time to make them could be a deal breaker. Obviously volume will bring the cost down considerably, but a small batch could see these at around the £100 mark. 

[ramjet]

Welcome to TLF @Vrin.

You should duck over to the Introductions area and say hi in there as well.

Any questions or issues using the forums, feel free to ask one of us mods. We're here to help.  

 

@Miguel Maybe try another group buy effort again?

[mikeerhymes]

Certainly don’t appear to be the same craftsmanship, however these are what I was looking for, hopefully may help others too…

 

https://www.elise-shop.com/stainless-rear-clamshell-to-diffuser-brackets-exige-s2-p-524689.html