lotuslover1

i installed brand new RC injectors and have never looked back.

i was thinking about adding it before the intercoolers,but somebody said that it might start to pool up inside with water

i will check after 2min,not sure how belt can be loose since the tensioner acts on its own

i have the same issue,i replaced the alternator a few years back with the lighter/smaller version.At idle im getting 13.7 volts,battery replaced 2 months ago with brand new bigger unit.

thats big horsepower

hi,what role does that plate at the front play?

i just changed mine after 6 years from the black belts to the blue Gates belts.

hi everyone,once i entered the values into the meter,i found it to be super accurate when compared to a friends app.

Good morning,update belts are on and everything is back together.Have gone for several drives now and she feels great.Although i have noticed now,when i accelerate in first gear,and press the clutch in,sometimes it doesnt want to get out of first.I thought it might be low on clutch fluid but its full,so im thinking i might need to look at the linkage,because every other gear is fine.

A vibrating object moves back and forth from its normal stationary position. A complete cycle of vibration occurs when the object moves from one extreme position to the other extreme and back again. The number of cycles that a vibrating object completes in one second is called frequency.

yep the new meters are versatile,just need to tell them what your measuring first

mike i know the frquency,but i need to add 3 values into the machine first 1.width of belt 2.distance between both centre lines of pulleys 3. weight of belt in grams per meter now i can use the frequency meter

im using this formula for now,if im wrong please let me know

hi,i have repaired the leaking power steering clamp and found the charcoal canister(thanks Mike).Since most owners are using all different types of frequency measuring tools i have opted for the Sonic brand from the UK.But its only as good as the values you input.I know two which are easy(width of belt 22mm and distance between both pulley centre lines 145mm) but i dont know the last one.Theres a table in the instruction manual but its only a guide.Im using GATES belts and they dont have the value listed.Does anybody know it? i think its referring to the weight in grams of the belt for every meter.