Panasonic Cockpit RM-310/610 connector wiring

[Finlandese]

I have managed to get a hold of two Panasonic cockpit roof stereos. Unfortunately I don´t have the amplifier for neither. The previous owner managed to get by with no external amplifier with the RM-310, and I have a pretty good clue about its connector wiring (only seven wires, of which four are for speakers). Does anyone have info on the connector wire colors for these?

Edited September 19, 2023 by Finlandese

[LOTUSMAN33]

[Finlandese]

Thank you, Dave!

 

That is the perfect answer for the RM-310! Now, do the RM-610.. 🙂

[skiing]

RM310 runs well without an amp - I have one in my Lancia - thanks, Henry

[Finlandese]

Henry,

Yep, only the RM-610 requires an amp. I Was just told the RM-610 connector wire colors on a facebook group. Red live , yellow ignition live black negative, then 4 pairs of signal output channels for the amp input side. 

Good enough for to test if it works. 🙂

Edited September 20, 2023 by Finlandese

[LOTUSMAN33]

RM610 

[jtmco]

I put a RM-310 in my S1. As stated above, no amp needed. I bought the radio before I bought the car!  One of my favorite things on the car.