tonytransam
-
Posts
265 -
Joined
-
Last visited
1 Follower
Recent Profile Visitors
5,928 profile views
.thumb.JPG.e0c3c0a8fac58165e8833b957e1438bf.JPG)
tonytransam's Achievements
-
Changed the clutch on my S2 and I know the hand brake is self adjusting but doesn’t seem to be doing so, is there any method to help this process along.
-
Are S2 hand brakes self adjusting?
tonytransam replied to tonytransam's topic in Suspension/Brakes/Wheels/Hubs/Steering/Geo
👍 -
Are S2 hand brakes self adjusting?
tonytransam replied to tonytransam's topic in Suspension/Brakes/Wheels/Hubs/Steering/Geo
So you just adjust it by pulling the hand brake on and off? -
Are S2 hand brakes self adjusting?
-
Worked out somebody had jumped in the car and pushed the clutch pedal with no fluid in the line causing the piston to stick in the pressed down position, so just filling with fluid and vacuum bleeding would not return the piston. I used a pressure tester to push the piston back out so all good now!
-
When bleeding, should I position the clutch in the pressed position or support it the unpressed position?
-
Bled it with a vacuum bleeder.
-
Changed clutch, replaced clutch hose and bled but now have a floppy clutch pedal 😫 help!
-
1980 Esprit S2 SJ Gear change Modification
tonytransam replied to tonytransam's topic in Gearchange/Gearbox/Clutch
8DCFF54D-19B3-4F53-8D71-2E6A6F94704E.heic
-
I'm sure it's on here somewhere but I cannot find it, are there any pics of how the gear change mod fits on and in particular where the little bit pictured goes in. 8DCFF54D-19B3-4F53-8D71-2E6A6F94704E.heic
-
S2 Panel behind seats
tonytransam replied to tonytransam's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC
That’s the one, my cars panel has the head lining material on it, so as mentioned I need to choose the glue carefully otherwise it will soak through. -
Need to re-glue the material back on the panel behind the seats, best way to do this would be to remove it, just wondering the easiest way to get it out, I’m guessing remove seats, but how is the panel held in place. Thsnks in advance
-
Attempting a clutch swap this weekend on an S2, I've tried to search for a write up but with no luck and as we now the write up in the Lotus workshop manual is vague. does anyone have a write up or any pics of the gearbox out on an s1 or s2 so I have some idea.
-
As the title says the heater blower has packed up, what I would also mention is the heater panel is not lighting up either with the headlights on, so is there a common feed or are there any common faults?
