nanardos
-
Posts
246 -
Joined
-
Last visited
.thumb.jpg.c934dd77d8b132b70a4d134e1429ee93.jpg)
.thumb.JPG.e0c3c0a8fac58165e8833b957e1438bf.JPG)
nanardos's Achievements
-
Hi All, The fluid in my car's clutch master cylinder needs to be replaced. Do you which fluid (DOT) must be used ? Cheers Bernard
-
Thanks
-
Faulty primary pump confirmed -
Thank you very much , wish me luck... 🤪
-
Hi, I need to replace the air filter on my 1987 HCI but I wonder how to remove the airbox shown on the attached picture the simple way Cheers Bernard
-
Hi, I have checked all that. The problem seems to come from a faulty primary pump. I will keep you informed. Thanks Bernard
-
Oops , the lights work fine but the car won't start... I don't quite understand why there would be a relation ship with the replacement of the light switch but it seems that the fuel pumps are not working. I have checked all the related fuses and relays but did not find anything wrong. Any idea ?
-
Hi All, I need to replace the fuel pump relays on my 1987 turbo HCI. Do you know where they can be bought. I have been on SJ Sportscars site bu did not fond them. Cheers Bernard
-
I just replaced the light switch (a nightmare...) , everything is working again.
-
I just ordered a new switch
-
Hi All, The sidelights / tail lights / licence plate lights / instrument panel lights / aircon panel lights have suddenly stopped working on my 1987 S3 Turbo HCI (US car) I have checked/ replaced all the related fuses but got no improvement. The headlight (low and high beam work fine Any ideas ? Bernard
-
Hi All, My (american) 1987 HCI was originally fitted with BPR6EY NGKs. I wonder whether even better sparkplugs have been made since for this car since 1987 Any ideas ?
-
Thank you all for your replies, I will investigate further and revert soon.
-
Hi Everyone I just tried to pass the MOT with my 1987 Esprit (originally an american car) but the car did not pass the pollution / emission control. The controller said that the car is too rich and the fuel injection needs to be adjusted. Do you know how/where to achieve this setting ? i mean where in the car of course...
-
87' HCI radiator fans otter switch location ?
nanardos replied to nanardos's topic in Engine/Ancilliaries
Just let Your engine run until the fans kick in and then disconnect the otter swichs one by one and you will find which one Keeps working When the fans stop
