Bell / Clutch Housing Washers

[fjmuurling]

Are there washers used on the bolts for mounting the clutch housing to the engine?

The parts manual doesn't mention them. I forgot if they were present (and I can't find them in my boxes with parts) when I took the gearbox of the engine. There was one bolt (one of the 2 lowest ones) mounted with a washer and silicone kit (not by me !!!).

All the bolts for mounting the clutch housing to the gearbox have washers according to the parts manual.

[Sparky]

Hiya - yes, all those should have washers.

[fjmuurling]

Thx info, it makes sense but just wanted to be sure.

[sailorbob]

They are listed in the parts manual but not shown on the diagram; part number A082F6541S, 12 off required.

[fjmuurling]

Hi Derek,

Are we lookinh at the same parts manual? Mine is the 1988 - 1992 one (paper version, I know i'm old school ☺️) (section 47.03B)

Those are the washers listed under item 24 and are for the clutch housing to gearbox bolts 12 pcs in total.

There are 11 bolts used for mounting the clutch housing to the engine. The only other item I could find which uses 11 bolts is the rearcover.

I reckon the above mentioned washers are the same for use with the bolts for mouting the gearboxcombo to the engine.

Freek

[sailorbob]

You are right, sorry I was looking at the wrong thing. Try part number A075W4024F, 11 off required M10 x 20 mm OD.

[fjmuurling]

No need to apologize Derek.

I bought a box of 100 pcs M10 x 20 mm OD washers. They are not the standard ones but DIN 126.

Freek