-
Posts
622 -
Joined
-
Last visited
Content Type
Profiles
Events
Forums
UPGRADE
Gallery
Blogs
Everything posted by sanj
-
I do indeed have ALDL to USB cable sets available for immediate shipment, see this eBay link to order: https://www.ebay.com/itm/175448207955 There seems to be some new restriction in the UK that prevents buyers from ordering these, but I do have a workaround. Message me if you are in the UK and wish to order. Cheers!
-
rear hubs V8 / Turbo SE
sanj replied to KaeptnNemo's topic in Suspension/Brakes/Wheels/Hubs/Steering/Geo
You can fit the later hub carriers on your SE. There is a larger web with a hole in it for the later handbrake cable, but you should be able to route your existing one without issue. Hubs/bearings etc. are all the same. -
FreeScan 2.10 is available here: https://www.dropbox.com/s/bd8qp1gc8kwmc6k/freescan_210.zip?dl=0
-
If the loose wire has not been plugged into the coolant sensor under the intake manifold then the fans will never come on, and the engine will not run properly.
-
If not, I offer them here, shipped worldwide via eBay's Global Shipping program: https://www.ebay.com/itm/174943876951
-
LED Headlights, very easy
sanj replied to Vulcan Grey's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC
$100 per set of 4, including all hardware and shipping in the US only. Note that these are specifically for US-specification Esprits only, designed to fit the 5.75" headlight mounting bases. https://www.jwspeaker.com/products/led-headlights-model-8630-evolution/ https://www.amazon.com/JW-Speaker-8630-5-75-Headlight/dp/B015ZBZMOM/ -
LED Headlights, very easy
sanj replied to Vulcan Grey's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC
I used genuine (and very expensive) DOT-legal LED lamp assemblies from JW Speaker, made here in the USA. -
LED Headlights, very easy
sanj replied to Vulcan Grey's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC
Nice write-up! If there's enough interest, I could be convinced to make another run of these. -
Here's my solution to the engine support issue. Inspired by a tool made by Stan, a former Lotus/Lambo tech. Adjustable up and down, it makes transaxle installation much easier. There is a large pad on a swivel on the other end of the centre threaded adjuster that supports the sump.
-
A missing resistor module in the red socket will most assuredly cause a code 26, so you might as well start there.
-
Inspired by Craig's vacuum pump delete idler shown in his post above (Htown), I designed and had fabricated a similar adjustment plate that uses the existing vacuum pump bracket. Like his, it is designed to use the A/C tensioner pulley, but can alternatively use an off-the shelf idler assembly from a Ford (with the substitution of a different spacer and bolt). Tension adjustment is performed exactly as it is with the factory pump installed, except one can now easily access the top pivot bolt! If anyone else wants to do this I did have a few extras made, PM me for details.
-
Not the model builder's fault. Monogram re-purposed their 1988 Esprit model kit to create the Sport 300, obviously they fell short.
-
Replacement O2 Sensor wire loom 4PIN connector
sanj replied to esprit17's topic in Misc including parts cross references
http://www.mouser.com/search/ProductDetail.aspx?R=0virtualkey0virtualkey12015798-B http://delphi.com/manufacturers/cv/connection-systems/catalog/feature?search=12015798 -
94 S4 steering wheel plan
sanj replied to Richard123's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC
The hub is not pinned to the wheel, it is welded on, and fairly substantially so. That said, you can carve it up, as I did. Prepare to spend the better part of an afternoon sawing and grinding to get it free and round. What you can't see in my pictures are the two substantial rods making up the spokes that are welded to the hub. Note that I threaded the two holes for alignment purposes, they are not threaded from the factory. Then you have to weld it to a custom made adapter, which is drilled for both Momo/Sparco and Nardi bolt patterns. I have extras for sale, PM me for details. -
Access to cold air flap actuator
sanj replied to Richard123's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC
^^^^^^^^^ This is exactly correct. -
Hi Paul, You should see about joining Lotus Corps, the Chicago area Lotus club. We are having our annual tune-up clinic next month, and I'm sure we could give you a hand with this task. Also, I believe one of our club members has a stock V8 muffler he would love to get rid of, if you are still in need. http://www.lotuscorps.org/index.php
-
Did you try just using the o-ring that came with it?
-
I would like to question this statement. I have never heard of anyone breaking the input shaft or primary shaft at their junction. Furthermore, by eliminating this flex point, you remove all tolerance for misalignment between the primary shaft and the crankshaft, which could be detrimental if more than a few thousandths. Carry on.
-
A rheostat capable of handling the required current for all of the dash lighting would be quite large, and get quite hot. This is likely why pre-'90 cars had two dimming rheostats.
-
Check the hose that runs horizontally between the back of the water pump and the inlet manifold. A leak at the water pump end will cause the mess you describe.
-
Identify connectors
sanj replied to Marco84's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC
The harness with many wires and a black connector is used on Federal (USA) cars for the logic box/warning module. It would probably be unused on your car. The black box is probably the ice detection module.